Tire pressure is the easiest thing to check and the one most riders forget. A few minutes a month makes the scooter safer, more comfortable and more efficient.

Why pressure matters
Too low: the scooter feels sluggish, the tire wears unevenly, range drops and the risk of a pinch flat goes up.
Too high: the ride gets harsh and bouncy, and grip on wet or rough surfaces gets worse.
How to check it
- Use a small gauge or a pump with a built-in gauge.
- Check when the tires are cold, before you ride.
- Find the recommended range printed on the tire sidewall or in the manual, and stay inside it.
- Adjust for load: heavier riders usually want the upper end of the range.
While you are down there
Look for cracks, embedded glass or thorns, and flat spots. Replace any tire that looks worn through, and make sure the valve cap is on.
How often
Once a month is a good habit, and always before a long trip or after the scooter has been stored for a while. If a tire keeps losing air, have it inspected rather than topping it up again and again.
